Automatic Roofing Corrugated PU Sandwich Panel Machine for PU Wall manufacturer from China RISHBIN WUXI COMPANY

Automatic Roofing Corrugated PU Sandwich Panel Machine for PU Wall

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Roofing Corrugated Panel PU Sandwich Pane

Roofing Corrugated Panel PU Sandwich Panel Machine for PU Wall Panel

Production Characteristic and Use

This machine is suitable to PU sandwich production, such as wall panel and roofing panel.
The plate can insulate heat, sound, and prevent burn, widely used in roof panel, wall panel, and so on.

PU Wall Panel

Working flow
Loading material---decoiling---guide--roll forming---feeding roller ---pre-heat the steel---foaming---combined two parts---shearing---packing manually

PU Sandwich Panel Production Line

First stap:
Loading material---decoiling---guide--roll forming---cut to length---out table

Second step:
Loading roofing product---pre-heat the steel---foaming---combined two parts---transportation---packing manually

The Basic Technical Parameters of Machine

Item	Description
Production Material(mm)	(0.25-1.0)×L, yield strength≤G300 Colored steel
Production speed	4-8 M/min
Production type	totally continuous production with PLC controlling
PU foam thickness	25-100mm
Composite structure	position fixed by double rubber tracker
Foaming system	totally automatically continuous foaming, quantity of foaming could be stepless adjustable
Power of production	≥ 22KW
Total power	≥ 35 KW
Cutting	pneumatic piston driving, non-stop cutting via sliding table
Electronic controlling system	full-frequency PLC controlling system

Panel Automatically Cutting System

1. Cutting machine can move 2500mm longitudinally along product line;fly saw of the cutting machine can move transversely 1900mm, Cutting machine moves longitudinally and transversely along the slide way.
2. Cutting machine adopts one-side blade band saw manner, cutting and revolving after cutting. The cutting saw can revolve, so cutting in two directions is realizable.
3. There is panel tight-pressing system (pneumatic) in the cutting machine.
4. There is location limiter to limit longitudinal and transverse motion of cutting machine.

Three Sets of Roll Forming Machine

1. Function: Roll forming for the profiles of PU panel
2. Use the welding H-beam, motor driver, sprocket chain driving
3. Technical data: Material of roller NO.45forged steel, with digital controlled procession,plated with hard chrome on surface of forming rollers

PU Sandwich Foaming Line

1.Two sets of conveyor rack: up conveyor is about 24m, down conveyor is about 30m.They lead the steel sheet from the roll forming machine to preheating room and to foaming,to cutting.
2. One preheating room: It is built by heat-insulation material, and it could heat up the steel sheet to 25-38 by heater.
3. One set of PU two component Liquid mixing and injecting section for foaming : it adopt Chinese high pressure pump. It have the temperature control system and material-level monitoring system. The tank of the material is about 150L. Two tanks.
4. Foaming and double rubber device include motor driver system to make panel.
5. The width of belt board is 1250mm, the range of adjusting distance between upper and lower frame belt board: min 25mm, max 200mm. And the range of adjusting thickness of sandwich panel :30mm,50mm,100mm.(30-50 for celling , 50-100 for wall)

Introduction of Machine

This PU Sandwich panel production line is an automatic production line.
In the PU sandwich panel producing procedure, the product line can continuously produce sandwich panel with PU as its core material.
The liquid state raw materials were continuously injected into the middle of three formed panels and reacting,foaming,solidifying in the double-rubber .
The PU sandwich panel could be cut out automatically according to the required length for users.