Carbon Arch Culvert Cold Roll Roof Panel Roll Forming Machine 30 m / min , 1.0 - 5.0 mm
| Place of Origin: | Zhejiang, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
Carbon Arch Culvert Cold Roll Roof Panel
Carbon Arch Culvert Cold Roll Roof Panel Roll Forming Machine 30 m / min , 1.0 - 5.0 mm
Quick Detail
Thickness: 1.0-5.0 mm
Minimum yield strenght: 345 MPA
Minimum tensile strength: 450 MPA
Minimum elongation in 50 mm is 12 percent.
Galvanizing Standard: G90 (Z275), G115 (Z350), G140 (Z450)
Corrugation profile:
Length of the sheet walls have to be adjustable by PLC.
PLC has to count produced sheet wall quantities.
All bearings will be SKF or FAG.
Design: According to the disigned agreed drawing by both sides.
Specifications
|
Coil Material |
Thickness |
1.0-5.0mm |
|
Coil width |
Depend on customer’s requires |
|
|
Yield Strength |
345-450Mpa |
|
|
Material |
GI. Carbon Steel |
|
|
Decoiler / Uncoiler |
Coil Width |
Max. 1500mm |
|
I.D |
510-610mm |
|
|
O.D |
Max. 1300mm |
|
|
Capability |
Max. 10 Tons |
|
|
Decoiler type |
Manual / Hydraulic/Automatic |
|
|
Feeding & Leveling |
Pinch feeding |
3 Units ( 6 Rollers ) |
|
Leveling |
7 Rollers ( Upper 3 Rollers, Bottom 4 Rollers ) |
|
|
Punching device |
Punching motion |
Hydraulic Punching, Post-punching |
|
Punching dies |
Cr12 Mov Steel, HRC58-62 |
|
|
Punching station |
1-2 Unites ( depend on hole patterns ) |
|
|
Punching in longitude controlled by PLC, punching at horizontal adjusted by manual hand wheel. |
||
|
Cutting device |
Cutting motion |
Hydraulic Cutting, post-Cutting ( cutting sheet after forming ) |
|
Cutting blades |
Cr12Mov with heat treatment HRC58-62 |
|
|
Length Measuring |
Automatic length measuring by encoder & PLC. |
|
|
Cutting Tolerance |
+/-1.5mm(per 3m) |
|
|
Roll Forming Machine |
Forming Stations |
17 Stations |
|
Rectifying |
RISHBIN WUXI COMPANY [China (Mainland)]
Business Type:Manufacturer | |
